…Now you can mount a set of Edge Saddlebags and keep your stock turn signals. This kit takes all the guess work out of relocating your stock signals by moving them from the fender to the license plate area.Does not include turn signals (read more)

Chrome plated 90 steel bracketsGreat for installing auxiliary lights or turn signal lights almost anywhereSold in pairs (read more)

Turn Signal Relocation Kit Needed When saddlebags are installed (read more)

Fits all Metric Cruisers. (read more)

Turn Signal Relocation for Harley Davidson Softail and Sportster. Comes with Chrome Laid Down License Plate. License Plate Frame not included. This kit ONLY WORKS WITH existing wing standoff.Works with all Easy Brackets for Softail and Sportsters. (read more)

Mount auxiliary marker lights or turn signals to your license plate and open up that saddlebag area or just streamline your rear fender. This simple system mounts directly to the back of your license plate with support backing plate and two side mount brackets. The side mount brackets have a 38 hole… (read more)

Moves your flasher back to make room for saddlebags.Relocates OEM Turn Signals (read more)

Turn signals are a necessity its true but they can clash with the bikes look and get in the way of saddlebags. Cobras fix is a Rear Turn Signal Kit that relocate the indicators by replacing the long plastic stalks with shorter mounts. (read more)

Replace your large stock rear turn signals with these streamlined bullet shaped turn signals relocate your license plate below the taillight. Built-in light illuminates the relocated license plate. Single circuit turn signals come equipped with our stylish deep-dish bezels with red lenses. A flat license… (read more)

Note: Image Shows Black Relocation Kit. Actual Kit Is ChromeTwo types of turn signal relocation kits available: universal kit moves rear turn signals to the license plate mount and specific-fit kits relocate stock turn signals further back by extending the chrome fender rail (read more)

Constructed of 14 gauge steel. This rigid bracket is laser cut and formed. The finish is Black Powder Coat that looks great and is very tough. Relocates rear turn signals further back for use when putting on saddlebags. - Honda Shadow VLX 600- Honda Shadow Spirit 1100 (read more)

These new front turn signal relocators move your signals from the hand grip area of the handlebar to the front fork below the headlight for a clean custom look. They are CNC machined from billet aluminum and triple chrome plated. Retains the stock wiring and is easy to install. Hardware and easy to… (read more)

Chrome studs that allow the turn signals to be relocated to the front fork Installs in place of the top or bottom triple tree pinch bolts 516 inch-2410mm x 1.5 thread sizes Made in the U.S.A. (read more)

3 in 1 FeatureSequential Turn SignalRight and Left LED arrays indicate sequential turn signals. These superbright LEDs 8500 mCd have a wide viewing angle of 180 degrees. They are sunlight readable even from the adjacent lanes. Brake Light ModulatorA cluster 6 LEDs is magnified by an acrylic lens to broadcast… (read more)

…saddlebags available in two sizes Made of rugged leather-grain Saddlehyde and reinforced panels Streamlined shape allows stock turn signal locations to be used turn signal relocator bracket included for harder-to-fit bikes Unique forward-open lid stays open for easy access and frees up both hands for loading… (read more)

Turn Signal Relocation kit mounts to the license plate mount for a clean attractive look. This kit only works with the existing wing standoff.Works with all Easy Brackets for Softail. (read more)

Complete kit to relocate the turn signals to accommodate the use of oversize saddlebagsReplaces OEM part 53820-00Hardware included (read more)

…features of the NessRWD assemblies and more. Made in the USA and beautifully chrome plated.Features:This license frame also includes DOT approved LED turn signalsbrake lights for the ultimate in safety and styleCan be used on any custom application or any RWD recessed mounting pockets listed elswhereMachined… (read more)

Now its easy to move your signals back for more saddlebag clearance Especially useful with oversized bags Each kit includes all wire brackets spacers connectors and hardware required for quick installation Replaces OEM s 68512-89 and 68430-89Note: Moves lights to fender mounts with two 14 inch-20 studs… (read more)

Note: Image Shows Chrome Relocation Kit. Actual Kit Is BlackTwo types of turn signal relocation kits available: universal kit moves rear turn signals to the license plate mount and specific-fit kits relocate stock turn signals further back by extending the chrome fender railNote: May Not Fit with All… (read more)

Moves your flasher back to make room for saddlebags.Relocates Stock Turn Signals. (read more)

Stamped chrome-plated steel. Slotted license plate bolt hole. Required when mounting Hard Saddlebags to V Star 1100 650 Custom models. (read more)

Features dual-function red LED brakerunning lights and single-function amber LED turn signals. Die-cast aluminum frame with single or dual row integrated turnbrake LED. Accepts most 4 x 7 inch license plates may require redrilling license plate. Includes complete instructions and wiring diagram. Available… (read more)

This turn signal relocation bracket bolts on easily without any wiring modification does away with the big ugly stock signal mounts and tucks them in close to the forks and headlight for a much cleaner and custom look. For use with item SM9006 Driving Lights. (read more)

Kit moves turn signals from the handlebars to the upper rigid fork assembly Accepts stock and most aftermarket turn signalsmarker lightsNote: Not for use with fork-mounted windshields. (read more)

…allow you to replace your large stock rear turn signals with these streamlined bullet shaped turn signals and relocate your license plate below the taillight. There is a built-in light to illuminate the relocated license plate. The bullet shaped turn signals are single circuit and come equipped with our… (read more)

Raised License Plate Holder with amber or red LED Turn Signal Lights. When replacing incandescent turn signals with LEDs a Dual Load Equalizer is required 13-304A. Fits standard 7 x 4 motorcycle plates. This works as a running and brake light on the plate itself. (read more)

Kawasakis using a Memphis mounting kit need this kit to get the clearance needed for the turn signals. (read more)

Raised License Plate Holder with amber or red LED Turn Signal Lights. When replacing incandecent turn signals with LEDs a Dual Load Equalizer is required 13-304A. Fits standard 7 x 4 motorcycle plates. (read more)

…not only unsafe its illegal and leaves you likely to get pulled over by police. This license plate mount will provide additional tail brake and turn signal lights as well as a license plate light and mounting location. The LED lights are extremely bright even in direct sunlight and both water and vibration… (read more)

Turn Signal Relocation Kit works with Custom Chrome and Drag Specialties laid down license plate frame unless otherwise noted. This kit only works with wing standoff Not Provided. (read more)

…IntensityRunningBrake or Brake Only LEDs 20 Super Bright Amber Turn Signal LED Per SideFrame dimensions: 7-316 length x 4-14 widthMounting holes center to center: 5-34 x 2-1316Mounting Hardware IncludedLifetime Warranty Black Horizontal Die-Cast With Amber Turns (read more)