Two-Piece Studded Wide Touring Seat with chrome studs and conchos. The deeply pocketed driver seat is a full 17 inch wide and sits you at the ideal cruising angle. The drivers back is well supported by the nose of the passenger seat that extends forward to create a full 8 inch backrest. The passenger… (read more)

…bracket HD 52467-00 be removed from the stock seat and bolted to the Mustang seat. Note: All 2000-03 FLSTS Heritage Springers require Mustangs Mounting bracket Part M-78037.The Mustang Original Studded seat has all the features to make it our most popular seat. A full front bucket for the rider trimmed… (read more)

…backrest on the market. The deeply pocketed drivers seat is 17 inch wide and sits you at the ideal cruising angle. The entire 12.5 inch width of the comfortable passenger seat is fully supported by Mustangs unique internal steel support wings.Studded with conchosFront width 17 inchRear width 12.5 inch (read more)

Mustangs popular touring seat features several design improvements over the stock seat. The 16 wide deeply pocketed driver bucket sits you at the ideal cruising angle. The drivers back is well supported by the nose of the passenger seat that extends forward to create a full 6.5 high backrest. The entire… (read more)

…supported by the nose of the passenger seat that extends forward to create a full 8.5 inch backrest. The passenger sits comfortably in a bucket that utilizes Mustangs unique internal steel support wings to keep the entire width of the molded foam supported.Studded with conchosFront width 16 inchRear width… (read more)

Chromes studs and leather-tied conchos Chrome plated hinges lockable latches and includes two keys Flat-backed bags have recessed front corners Reinforced fiberglass covered with high quality expanded vinyl Rubber seal to help make bags water resistant Lined with felt-like materialSaddlebags measure… (read more)

…and aftermarket bars with welded insert plates or with no center insert at all. Pads do not fit Road King sissy bars. A perfect match to a new Mustang seat all pads have carpeted backs chrome brackets and screws. All pads feature two chrome straps but only 9 pads have a threaded center hole for blind… (read more)

…passenger seat that extends forward to create a full 6.5 inch high backrest. The entire 12 inch width of the comfortable passenger seat is fully supported by Mustangs unique internal steel support wings -- no sagging on the edges no more passenger complaints. The studded seat features chrome studs and leather… (read more)

…solo. The seat extends forward to provide additional driver back support. Passenger seats utilize internal steel support wings for all day comfort -- your passenger will be happy. Mustangs engineers have designed the Road Star seat to close tolerances for a perfectly tight fit.Vintage no studs or conchosDimensionsFront… (read more)

…while you are seated. Unlike all others you do not remove the seat or use a wrench. Easily snaps into four height positions or completely out.The Wide Studded Style has the perfect combination of ultimate comfort and traditional styling. Features a skirt with braided edge trim chrome studs and leather… (read more)

The Regal pillow top one-piece seat design offers a plush look tufted with covered buttons and no studs.Dimensions:Front Width: 18Rear Width: 16.5 (read more)

…cover wraps snug over your stock seat for a very smooth tight fit. A bungee cord sewn into the hem tucks neatly under the seats edge and keeps it securely in place. The chrome-plated brass studs will never rust. Also sold with fringe see below.Mustangs matching Studded Tank bibs complete the custom look… (read more)

…stock seat and bolted to the Mustang seat. Note: All 2000-03 FLSTS Heritage Springers require Mustangs Mounting bracket Part M-78037.2006-07 models require Mustangs mounting bracket Part No. 78116The Super Touring Wide Studded and Wide Vintage seats are available as separate solos and rear seats. The… (read more)

…Studded and Wide Vintage seats are available as separate solos and rear seats. The Wide Solos may also be combined with the standard or thin rear seat. Mustangs solos and rear seats will not fit with stock solos and rear seats.Width - 14Note: All 2000-03 FLSTS Heritage Springers require Mustangs Mounting… (read more)

….Mustangs solos and rear seats will not fit with stock solos and rear seats.Note: All 2000-03 FLSTS Heritage Springers require Mustangs Mounting bracket Part M-78037.All 2000-02 models require the stock rear mounting bracket HD 52467-00 be removed from the stock seat and bolted to the Mustang seat. Now… (read more)

…seats will not fit with stock solos and rear seats.Note: All 2000-03 FLSTS Heritage Springers require Mustangs Mounting bracket Part M-78037.All 2000-02 models require the stock rear mounting bracket HD 52467-00 be removed from the stock seat and bolted to the Mustang seat. 2006-07 models require Mustangs… (read more)

…bar pads. Requires Mustang FenderSeat Nut Kit M-78084 for rear fender.FXSTB Night Train FLSTF Fat Boy 200mm Rear Tire current FXST seats will fitNote: The Standard Night Train and Fat Boy appear to have the stud plate in the fender. This must be removed when mounting the Mustang seat.FLSTSC Springer Classic… (read more)

…seats will not fit with stock solos and rear seats.Note: All 2000-03 FLSTS Heritage Springers require Mustangs Mounting bracket Part M-78037.All 2000-02 models require the stock rear mounting bracket HD 52467-00 be removed from the stock seat and bolted to the Mustang seat. 2006-07 models require Mustangs… (read more)

…rear seats.All 2000-02 models require the stock rear mounting bracket HD 52467-00 be removed from the stock seat and bolted to the Mustang seat. Note: All 2000-03 FLSTS Heritage Springers require Mustangs Mounting bracket Part M-78037.Solo is trimmed with a braided edge skirt featuring chrome studs and… (read more)

…trim. Mustang VTX 1800 seats measure no higher than stock seats but may initially feel slightly firmer.STUDDED: The perfect combination of ultimate comfort and traditional styling. Features braided edge trim and chrome studs.Note: This price is for the passenger pillion pad only. The drivers seat shown… (read more)

…trim. Mustang VTX 1800 seats measure no higher than stock seats but may initially feel slightly firmer.STUDDED: The perfect combination of ultimate comfort and traditional styling. Features braided edge trim and chrome studs.Note: This price is for the drivers solo seat only. The passenger seat shown… (read more)

…inch wide driver seat. The 12-12 inch wide passenger seat utilizes unique Mustang internal steel support wings. The driver back is well supported by the nose of the passenger seat that extends forward to create a full 9 inch backrest.Studded with conchos.Mustang motorcycle seats are designed for all… (read more)

Mustangs Sport Touring seats have a 16.5 wide driver bucket. The passenger seat is 8 wide. All styles feature a skirt with braided edge trim. The built-in driver backrest offers more features than any other backrest on the market. Note: For Nomad models Mustang recommends using M-76056 or M-76055 sissy… (read more)

…edges no more passenger complaints. Mustangs touring seat is sold with or without studs and conchos. It is also available with a built-in driver backrest. Mustangs seat will accept Victorys short and tall sissy bars. Solos are also sold separately.NOTE: Mustang Seats will not fit with Tour-Pak on Kingpin… (read more)

…with a deeply pocketed 16-12 inch wide driver seat. The 12-12 inch wide passenger seat utilizes unique Mustang internal steel support wings.Mustang motorcycle seats are designed for all-day riding comfort for both the driver and passenger. Every Mustang seat is made in the United States by true craftsmen… (read more)

…seat. The best riding posture for unparalleled long-distance comfort The front bucket comfortably angles the driver back into the seat to eliminate that pushed-forward feeling. Mustang Royal Star seats measure no higher than the stock seat which tends to collapse to a lower uncomfortable seating position… (read more)

…seats will not fit with stock solos and rear seats.Note: All 2000-03 FLSTS Heritage Springers require Mustangs Mounting bracket Part M-78037.All 2000-02 models require the stock rear mounting bracket HD 52467-00 be removed from the stock seat and bolted to the Mustang seat. 2006-07 models require Mustangs… (read more)

…seats will not fit with stock solos and rear seats.Note: All 2000-03 FLSTS Heritage Springers require Mustangs Mounting bracket Part M-78037.All 2000-02 models require the stock rear mounting bracket HD 52467-00 be removed from the stock seat and bolted to the Mustang seat. 2006-07 models require Mustangs… (read more)

Mustang FX and FL seats fit all Big Twin models from 1958-86 except FXR and FLT.The Mustang Studded seat has all the features to make it our most popular seat. A full front bucket for the rider trimmed with a braided edge skirt that comes down over the frame and fender for a clean uninterrupted look… (read more)

…solos and rear seats will not fit with stock solos and rear seats.Note: All 2000-03 FLSTS Heritage Springers require Mustangs Mounting bracket Part M-78037.All 2000-02 models require the stock rear mounting bracket HD 52467-00 be removed from the stock seat and bolted to the Mustang seat. More padding… (read more)

…seat to eliminate that pushed-forward feeling. Mustang Royal Star seats measure no higher than the stock seat which tends to collapse to a lower uncomfortable seating position. The deeply pocketed front bucket is a full 17 inch across. Additional driver back support is provided by the passenger seat… (read more)

…pocketed 16-12 inch wide driver seat. The 12-12 inch wide passenger seat utilizes unique Mustang internal steel support wings. The driver back is well supported by the nose of the passenger seat that extends forward to create a full 9 inch backrest.Mustang motorcycle seats are designed for all-day riding… (read more)