Paughco Motorcycle Accessories 4.8 Gallon Universal Low Tunnel Tank (PAUGH-840)
…fitting for O.E.M. and aftermarket petcocks installed on the left side of the tank. Includes a threaded hose line fitting for the vent bung on the bottom of the tank. Cap not included.21in tank length 11in tank width 9in tank depth 21 tunnel length 3 12in tunnel depth 3in tunnel width 22in centerline hole… (read more)

 

 

Kraft/Tech 1-Piece Stretched Custom Gas Tanks Pop-Up (KRAFT-K91017)
…the tunnel plate to be sunken below the bottom surface of the tank making grinding of the welds unnecessary. Tank is mounted to the frame using the supplied weld on brackets. When the brackets have been installed they mount to the gas tank using the new exclusive designed recessed grommet mounting system… (read more)

 

 

Paughco Motorcycle Accessories Extra Narrow Tunnel Custom Gas Tank (PAUGH-804C)
16 gauge steel. Single cap wide Mustang style tank. 2.4 gallon capacity. Comes with two 14in petcock outlets. Horseshoe mounting tab in front.16 12in tank length 9in tank width 7in tank depth 2 14in tunnel depth 2 14in tunnel width 17in centerline hole-to-hole on mounting brackets. (read more)

 

 

Kraft/Tech 1-Piece Stretched Custom Gas Tanks Pop-Up (KRAFT-K91020)
…the tunnel plate to be sunken below the bottom surface of the tank making grinding of the welds unnecessary. Tank is mounted to the frame using the supplied weld on brackets. When the brackets have been installed they mount to the gas tank using the new exclusive designed recessed grommet mounting system… (read more)

 

 

Biker's Choice Rolled Edge Gas Tanks - 95-03 Sportster (BC-48-9833)
Comes complete with mounting hardware rubber grommets and tank screw-in gas cap. Center fill screw-in style gas cap. 3.4 gallon capacity. (read more)

 

 

Biker's Choice Mini Speedo with L.E.D. Odometer 2:1 Drive Ratio (BC-49-0418)
2 12in diameter with black facewhite L.E.D. 0-140 MPH. Cable driven. Features accumulated mileage Tip 1 check total mileage for full gas tank can be reset to zero and Trip 2 calculate mileage from A to B destination can be reset to zero. (read more)

 

 

Biker's Choice Screw-In Flush Mount Gas Caps Non-Vented - 84-07 models with screw bungs (BC-48-2413)
…these screw-in caps to give a flush mounted clean look. When the cap is secured in place it cannot be removed easily without the locking tool. Keeps tank secure and free from unwanted contaminants. (read more)

 

 

Paughco Motorcycle Accessories Custom Mount Mustang Tanks - Sportster and Big Twin (PAUGH-821)
…13in wide 8in deep with left late model petcock outlet and indented bottom for rocker box clearance tunnel is 19 12in long 2 316in wide 4 14in deep. Tanks require custom mounting. (read more)

 

 

Baron Custom Accessories Profiler Gas Cap (BA-7450U)
Our Profiler Cap gives your tank that custom look. Special insert allows use of polished stainless-steel threaded cap in place of your stock locking cap. Installs in minutes with included 2-part epoxy. (read more)

 

 

Biker's Choice 2in Stretched Gas Tank - 00-06 Softail Carbureted (BC-48-9821)
2in stretch 1-piece tank. Dash mount for 2000 and up with left bung to accept O.E.M. gas cap with gauge. Carbureted and fuel injection. Comes with welded on extensions. 5.1 gallon capacity. (read more)

 

 

Paughco Motorcycle Accessories 3.4 Gallon Universal Low Tunnel Tank (PAUGH-840B)
…fitting for O.E.M. and aftermarket petcocks installed on the left side of the tank. Includes a threaded hose line fitting for the vent bung on the bottom of the tank. Cap not included.21in tank length 11in tank width 9in tank depth 21 tunnel length 3 12in tunnel depth 3in tunnel width 21 12in centerline… (read more)

 

 

Biker's Choice QuickBob Tank Conversion Mount Kit - 95-03 Sportster (BC-48-9733)
Allows installation of Sportster QuickBob tanks to 1995 and later models. Includes custom coil brackets and ignition switch relocation bracket. (read more)

 

 

Hopnel Gas Tank Protector (BBP-H50-502BK)
Universal apron to fit most Cruisers. Great for while youre tinkering so you dont scratch your tankHandy tool pouches built in. (read more)

 

 

Mustang Seats Offset Driver Backrest Post - Most Mustang Seats with Driver Backrest (M-75099)
…of our standard driver backrest. Mustangs Offset Driver Backrest Post is available for riders looking to move back away from their handlebars and gas tank. This post replaces the standard driver backrest post in all Mustang solo seats that have the built-in driver backrest unit.Offset post can be used… (read more)

 

 

Biker's Choice Quickbob Tanks with Flush Looking Gas Cap - 82-94 Sportster (BC-48-9755)
1-piece. Stretched. Smooth no dash. Includes mounting hardware and rubber grommets. 4 gallon capacity. (read more)

 

 

Willie and Max Black Label Tank Panel - VTX1300 02 and newer (WM-59565-00)
The perfect compliment to any of the Honda VTX 1300 models. Adds effortless style to your stock gas tank Made out of high durable synthetic leather. (read more)

 

 

Kuryakyn GranCruise Bag (KY-4139)
…capabilities this bag has it all. And to top it off you can mount it about anywhere luggage rack backrest or atop your gas tankMounting Options:Tank Bag: Throw it over your tank and have a windowed pocket to hold your map or other viewable items. A quick-stuff pocket and expandable bottle holder attach… (read more)

 

 

Show Chrome Accessories (Big Bike Parts) Chrome Edge Guard for Tanks Fenders Windshields - 20 foot length (BBP-900251EC)
…install Edge Guard to add further distinction to your motorcycle. Comes in a 20 foot length more than enough for most projects. Perfect trim for Honda gas tanks windshields even front fenders. (read more)

 

 

Paughco Motorcycle Accessories Mustang-Style Low Tunnel Tank (PAUGH-850B)
…fitting for O.E.M. and aftermarket petcocks installed on the left side of the tanks. Includes a threaded hose line fitting for the vent bung on the bottom of the tank. Cap not included. 22 12in tank length 11in tank width 10in tank depth 22 12in tunnel length 3 12in tunnel depth 3in tunnel width 19in centerline… (read more)

 

 

Biker's Choice Flatside Stretched Gas Tank - 84-99 Softail and Custom frames with flatside mounts (BC-48-9752)
No hardware included. 5.5 gallon capacity. Screw cap. (read more)

 

 

Fitch Fuel Catalyst (APS-F5T)
…Catalyst. Engines can be equipped with the Fitch F5T Drop-In Unit in seconds. As the name suggests the units actually drop directly into the fuel tank. After a Fitch Fuel Catalyst is installed the engine will almost immediately experience a cleaning of the fuel system. In a short time there will be… (read more)

 

 

Biker's Choice Custom 2in Stretched Tank - 04-06 Sportster (BC-49-3233)
4 gallon capacity. Center screw-in type bung. 2in stretch from stock. Mounting hardware included. (read more)

 

 

Paughco Motorcycle Accessories Mustang-Style High Tunnel Tank (PAUGH-852A)
…fitting for O.E.M. and aftermarket petcocks installed on the left side of the tanks. Includes a threaded hose line fitting for the vent bung on the bottom of the tank. Cap not included. 22 12in tank length 12in tank width 10in tank depth 22 12in tunnel length 5 12in tunnel depth 3in tunnel width 20in centerline… (read more)

 

 

CruiserCustomizing Chrome Fender Gas Tank Emblem - Indian Drifter pair (CC-EMBLEM-DRFTR)
…other words...you get 2 emblems for 29.95 Stand out from the rest of the pack and customize your ride with a pair of these chrome molded FenderGas Tank emblems.These Retro classic emblems can be applied to any flat or slightly curved surface with the special laser die-cut double sided automotive adhesive… (read more)