…that attach to the fork tubes. The original signals mount directly to the split clamps. This greatly cleans up and improves the look of the bike by tucking the signals in close to the forks and eliminating the unattractive black handlebar signal mounts. (read more)

Chrome-plated. Attaches to pinch bolts. (read more)

Chrome-plated. Hardware included. Allows horizontal mounting of handlebar mounted bullet style turn signal. (read more)

Allows horizontal mounting of handlebar-mounted bullet-style turn signals Compact design tucks the signals in for a cleaner look Replaces OEM 68266-03 on 86-03 XL FXD and Softail with handlebar-mount turn signals (read more)

Chrome fork lights with hole for spotlight and turn signal mounting pair.SPOTLIGHTS NOT INCLUDED. (read more)

…in front of your windshield or other front-mounted items.If you have changed your stock directionals to custom or L.E.D. turn signals and they no longer flash when activated use the KY-4855 load equalizer to cure the problem. This load equalizer duplicates the draw of a stock 35 watt turn signal bulb… (read more)

…for the front of the motorcycle include clear and amber lenses so they can be used as turn signals or driving lights. Universal kits include all three lens options red amber and clear.Very ImportantSilver Bullets have single filament bulbs which function as running lights or turn signals. With the… (read more)

…running lights or turn signals. With the addition of our Run-Turn Controller KY-4865 for H-D or KY-4710 for Metrics it is possible for Silver Bullets used in front applications to function as both running lights and turn signals. Note: Not intended to replace existing turn signals - not D.O.T. approved… (read more)

Chrome studs relocate stock or aftermarket turn signals to the upper triple tree. Kit includes two 516in-24 studs.NOTE: Not for use with fork mounted windshields. (read more)

Chrome die-cast construction For mounting signals on front fork tubes 516 inch non-threaded holes Sold in pairs (read more)

…turn signals. With the addition of our Run-Turn Controller KY-4865 for H-D or KY-4710 for Metrics it is possible for Silver Bullets used in front applications to function as both running lights and turn signals. Amber and red lenses are SOLD SEPARATELY.Note: Not intended to replace existing turn signals… (read more)

…in place. With H3 bulbs in a 3 diameter stretched bullet housing that fl ows down to a coordinating 2-14 turn signal housing these are the answer to your stylin front lighting. Designed to mount directly to your forks with Kryakyn Two-Piece Clamps Sold separately. (read more)

…designed to cradle your headlight keeping the entire unit contained in a small area. Installs onto your stock front turn signal mount. Comes complete with driving lights and indicator lights. Mount system allows adjustment of forward light projection angle. (read more)

…on your motorcycle. vectraLIGHTS are mirror mounted to make you look larger than life. VectraLight has a 2-WAY flash. There are 5 super bright RED LEDs facing the rear and 5 YELLOW LED facing the front.VectraLight will serve as an additional turn signals brake lights and running lights.A unique feature… (read more)

Chrome-plated. Amber lens. 516in-24 thread. Custom replacement turn signal. Sold individually.Note: Directional stand-off bracket required for mounting rear turn signals. (read more)

Chrome-plated. Attaches to pinch bolts. (read more)

…clamps that attach to the fork tubes. The original signals mount directly to the split clamps. This greatly cleans up and improves the look of the bike by tucking the signals in close to the forks and eliminating the cheap black handlebar signal mounts. (read more)

2 Turn Signal Grilles add a striking accent to Suzuki OEM round turn signals. These Turn Signal Grilles are versatile as they can be used on both the front and the rear turn signals. Made of chromed stamped steel. Mount easily with included double adhesive tape. Come as pair. Fits: most late model Suzukis… (read more)

Allows mounting of turn signals to the front forks without the light bar6061-T6Chrome PlatedSold in pairs (read more)

Available in Chrome or Blackhigh intensity LEDsRunning and turn signal functionIncludes mounting hardware and wiringMounting stud measures: 10mm X 1.25 inchesRear light Includes red and amber LEDs and front includes amber onlySold in Pairs (read more)

Signal kit includes front amber and rear red turn signals with clear lenses 41mm front clamps rear mounting brackets and hardwareFront signal kit only with dual-function amber LEDs and clear lenses is available signal mounts not includedRear signals with dual-function amber or red LEDs and clear lenses… (read more)

…front turn signal swap will streamline the front of your FLHT or Heritage By simply replacing the stock flat turn signals with these sleek bullet models the front end will appear lighter and more proportionate. Mounting is the same as stock for ultra clean installation. These new Bullet Turn Signals… (read more)

…flat-style turn signal with these beautifully chrome-plated molded plastic lens grilles Universal mounting method allows the same grilles to be mounted to horizontally or vertically mounted lights Include necessary mounting screws sold in pairsNote: Will only fit OEM-style of turn signals not aftermarket… (read more)

…clear lens to the OEM turn signals. LEDs are brighter than stock bulbs providing added safety. LED circuit boards plug into OEM bulb socket replacing the stock bulb. Each LED circuit board has a polished chrome face plate to enhance illumination. Turn Signal Conversion kits mount with OEM screws. Come… (read more)

Fits all Harley-Davidson models - mounts on any flat surfaceProvides a true custom lookHigh visibility LEDsEach part is designed to superior standards offering a wide range of features and benefitsMade 100 exclusively in the U.S.A.High gloss black anodized with highlight cut giving a sharp contrast… (read more)

Signal kit includes front amber and rear red turn signals with clear lenses 41mm front clamps rear mounting brackets and hardware Replacement LED boards available in red or amber sold each Replacement lenses available in clear or smoke sold in pairs (read more)

Chrome-plated steel brackets. (read more)

This turn signal relocation bracket bolts on easily without any wiring modification does away with the big ugly stock signal mounts and tucks them in close to the forks and headlight for a much cleaner and custom look. For use with item SM9006 Driving Lights. (read more)

Amber LED Turn Signal Conversion Kits listed on the opposite page provide a unique honeycomb clear lens to the OEM turn signals. LEDs are brighter than stock lights providing added safety. LED circuit boards plug into OEM bulb socket replacing the stock bulb. Each LED circuit board has a polished chrome… (read more)

Available in Chrome or Blackhigh intensity LEDsRunning and turn signal functionIncludes mounting hardware and wiringMounting stud measures: 10mm X 1.25 inchesRear light Includes red and amber LEDs and front includes amber onlySold in Pairs (read more)

Replace those clunky stock turn signals on the back of your bike with these perfectly sized 2-14 inch bullets. The 1 inch long universal mount keeps these lights tucked close to your bike for a smooth clean look. Use the large or small rubber mount adapter whichever one best suits your application bolt… (read more)

Chrome-plated steel brackets O.E.M Replaces H-D68527-63 (read more)